IEC 60086
Primary Battery Certification
Testing requirements:
This certification is on a voluntary basis and requires product testing according to IEC/EN60086-1, IEC/EN60086-2 as well as monitoring of the production sites. It is being checked by the independent technical experts group TÜV SÜD Product Service. Standards IEC/EN60086-1,IEC/EN60086-2 are intended to standardize primary batteries with respect to dimensions, nomenclature, terminal configurations, markings, test methods, performance, safety and environmental aspects.
Cert mark statements:
Type tested: For products not “ready-for-use”, the certification mark statement is only applicable to the certified part of the product (e.g. the switch).
Production monitored: The continuous surveillance of the manufacturing of a product is a basic prerequisite for a certification awarding a certification mark. A certification with a certification mark requires always a product testing as well as monitoring of the production sites. It is being checked by the independent technical experts group TÜV SÜD Product Service whether the manufacturer is capable to manufacture products of a consistent quality in a serial production according to the requirements and disposes of the necessary quality system as i.e. incoming goods inspection, material lists and also a final product check. Furthermore, it should be ensured that the required measuring and testing equipment has been calibrated. Within the scope of the surveillance e.g. safety-critical components or other used materials are checked.
In function of the certification mark samples are also taken from the production line for further laboratory tests. Unauthorized changes lead to the invalidity of the certificate and the TÜV SÜD certification mark must not be used anymore.
Testing requirements:
This certification is on a voluntary basis and requires product testing in accordance with IEC/EN60086-1, IEC/EN60086-2, IEC/EN60086-4 as well as monitoring of the production sites. It is being checked by the independent technical experts group TÜV SÜD Product Service. Standards IEC/EN60086-1, IEC/EN60086-2, IEC/EN60086-4 are intended to standardize primary lithium batteries with respect to dimensions, nomenclature, terminal configurations, markings, test methods, performance, safety under intended use and reasonably foreseeable misuse and environmental aspects.
Cert mark statements:
Type tested: For products not “ready-for-use”, the certification mark statement is only applicable to the certified part of the product (e.g. the switch).
Production monitored: The continuous surveillance of the manufacturing of a product is a basic prerequisite for a certification awarding a certification mark. A certification with a certification mark requires always a product testing as well as monitoring of the production sites. It is being checked by the independent technical experts group TÜV SÜD Product Service whether the manufacturer is capable to manufacture products of a consistent quality in a serial production according to the requirements and disposes of the necessary quality system as i.e. incoming goods inspection, material lists and also a final product check. Furthermore, it should be ensured that the required measuring and testing equipment has been calibrated. Within the scope of the surveillance e.g. safety-critical components or other used materials are checked.
In function of the certification mark samples are also taken from the production line for further laboratory tests. Unauthorized changes lead to the invalidity of the certificate and the TÜV SÜD certification mark must not be used anymore.
Testing requirements:
This certification is on a voluntary basis and requires product testing in accordance with IEC/EN60086-1, IEC/EN60086-2, IEC/EN60086-5 as well as monitoring of the production sites. It is being checked by the independent technical experts group TÜV SÜD Product Service. Standards IEC/EN60086-1,IEC/EN60086-2, IEC/EN60086-5 are intended to standardize primary batteries with aqueous electrolyte with respect to dimensions, nomenclature, terminal configurations, markings, test methods, performance, safety under intended use and reasonably foreseeable misuse and environmental aspects.
Cert mark statements:
Type tested: For products not “ready-for-use”, the certification mark statement is only applicable to the certified part of the product (e.g. the switch).
Production monitored: The continuous surveillance of the manufacturing of a product is a basic prerequisite for a certification awarding a certification mark. A certification with a certification mark requires always a product testing as well as monitoring of the production sites. It is being checked by the independent technical experts group TÜV SÜD Product Service whether the manufacturer is capable to manufacture products of a consistent quality in a serial production according to the requirements and disposes of the necessary quality system as i.e. incoming goods inspection, material lists and also a final product check. Furthermore, it should be ensured that the required measuring and testing equipment has been calibrated. Within the scope of the surveillance e.g. safety-critical components or other used materials are checked.
In function of the certification mark samples are also taken from the production line for further laboratory tests. Unauthorized changes lead to the invalidity of the certificate and the TÜV SÜD certification mark must not be used anymore.
Testing requirements:
This certification is on a voluntary basis and requires product testing in accordance with IEC/EN60086-1, IEC/EN60086-3, IEC/EN60086-4 as well as monitoring of the production sites. It is being checked by the independent technical experts group TÜV SÜD Product Service. Standards IEC/EN60086-1,IEC/EN60086-3, IEC/EN60086-4 are intended to standardize primary lithium watch batteries with respect to dimensions, nomenclature, terminal configurations, markings, test methods, performance, safety under in-tended use and reasonably foreseeable misuse and environmental aspects.
Cert mark statements:
Type tested: For products not “ready-for-use”, the certification mark statement is only applicable to the certified part of the product (e.g. the switch).
Production monitored: The continuous surveillance of the manufacturing of a product is a basic prerequisite for a certification awarding a certification mark. A certification with a certification mark requires always a product testing as well as monitoring of the production sites. It is being checked by the independent technical experts group TÜV SÜD Product Service whether the manufacturer is capable to manufacture products of a consistent quality in a serial production according to the requirements and disposes of the necessary quality system as i.e. incoming goods inspection, material lists and also a final product check. Furthermore, it should be ensured that the required measuring and testing equipment has been calibrated. Within the scope of the surveillance e.g. safety-critical components or other used materials are checked.
In function of the certification mark samples are also taken from the production line for further laboratory tests. Unauthorized changes lead to the invalidity of the certificate and the TÜV SÜD certification mark must not be used anymore.
Testing requirements:
This certification is on a voluntary basis and requires product testing in accordance with IEC/EN60086-1, IEC/EN60086-3, IEC/EN60086-5 as well as monitoring of the production sites. It is being checked by the independent technical experts group TÜV SÜD Product Service. Standards IEC/EN60086-1, IEC/EN60086-3, IEC/EN60086-5 are intended to standardize primary watch batteries with aqueous electrolyte with respect to dimensions, nomenclature, terminal configurations, markings, test methods, performance, safety under intended use and reasonably foreseeable misuse and environmental aspects.
Cert mark statements:
Type tested: For products not “ready-for-use”, the certification mark statement is only applicable to the certified part of the product (e.g. the switch).
Production monitored: The continuous surveillance of the manufacturing of a product is a basic prerequisite for a certification awarding a certification mark. A certification with a certification mark requires always a product testing as well as monitoring of the production sites. It is being checked by the independent technical experts group TÜV SÜD Product Service whether the manufacturer is capable to manufacture products of a consistent quality in a serial production according to the requirements and disposes of the necessary quality system as i.e. incoming goods inspection, material lists and also a final product check. Furthermore, it should be ensured that the required measuring and testing equipment has been calibrated. Within the scope of the surveillance e.g. safety-critical components or other used materials are checked.
In function of the certification mark samples are also taken from the production line for further laboratory tests. Unauthorized changes lead to the invalidity of the certificate and the TÜV SÜD certification mark must not be used anymore.
Testing requirements:
This certification is on a voluntary basis and requires product testing according to IEC/EN60086-1, IEC/EN60086-2 as well as monitoring of the production sites. It is being checked by the independent technical experts group TÜV SÜD Product Service. Standards IEC/EN60086-1,IEC/EN60086-2 are intended to standardize primary batteries with respect to dimensions, nomenclature, terminal configurations, markings, test methods, performance, safety and environmental aspects.
Cert mark statements:
Type tested: For products not “ready-for-use”, the certification mark statement is only applicable to the certified part of the product (e.g. the switch).
Production monitored: The continuous surveillance of the manufacturing of a product is a basic prerequisite for a certification awarding a certification mark. A certification with a certification mark requires always a product testing as well as monitoring of the production sites. It is being checked by the independent technical experts group TÜV SÜD Product Service whether the manufacturer is capable to manufacture products of a consistent quality in a serial production according to the requirements and disposes of the necessary quality system as i.e. incoming goods inspection, material lists and also a final product check. Furthermore, it should be ensured that the required measuring and testing equipment has been calibrated. Within the scope of the surveillance e.g. safety-critical components or other used materials are checked.
In function of the certification mark samples are also taken from the production line for further laboratory tests. Unauthorized changes lead to the invalidity of the certificate and the TÜV SÜD certification mark must not be used anymore.
Testing requirements:
This certification is on a voluntary basis and requires product testing in accordance with IEC/EN60086-1, IEC/EN60086-2, IEC/EN60086-4 as well as monitoring of the production sites. It is being checked by the independent technical experts group TÜV SÜD Product Service. Standards IEC/EN60086-1, IEC/EN60086-2, IEC/EN60086-4 are intended to standardize primary lithium batteries with respect to dimensions, nomenclature, terminal configurations, markings, test methods, performance, safety under intended use and reasonably foreseeable misuse and environmental aspects.
Cert mark statements:
Type tested: For products not “ready-for-use”, the certification mark statement is only applicable to the certified part of the product (e.g. the switch).
Production monitored: The continuous surveillance of the manufacturing of a product is a basic prerequisite for a certification awarding a certification mark. A certification with a certification mark requires always a product testing as well as monitoring of the production sites. It is being checked by the independent technical experts group TÜV SÜD Product Service whether the manufacturer is capable to manufacture products of a consistent quality in a serial production according to the requirements and disposes of the necessary quality system as i.e. incoming goods inspection, material lists and also a final product check. Furthermore, it should be ensured that the required measuring and testing equipment has been calibrated. Within the scope of the surveillance e.g. safety-critical components or other used materials are checked.
In function of the certification mark samples are also taken from the production line for further laboratory tests. Unauthorized changes lead to the invalidity of the certificate and the TÜV SÜD certification mark must not be used anymore.
Testing requirements:
This certification is on a voluntary basis and requires product testing in accordance with IEC/EN60086-1, IEC/EN60086-2, IEC/EN60086-5 as well as monitoring of the production sites. It is being checked by the independent technical experts group TÜV SÜD Product Service. Standards IEC/EN60086-1,IEC/EN60086-2, IEC/EN60086-5 are intended to standardize primary batteries with aqueous electrolyte with respect to dimensions, nomenclature, terminal configurations, markings, test methods, performance, safety under intended use and reasonably foreseeable misuse and environmental aspects.
Cert mark statements:
Type tested: For products not “ready-for-use”, the certification mark statement is only applicable to the certified part of the product (e.g. the switch).
Production monitored: The continuous surveillance of the manufacturing of a product is a basic prerequisite for a certification awarding a certification mark. A certification with a certification mark requires always a product testing as well as monitoring of the production sites. It is being checked by the independent technical experts group TÜV SÜD Product Service whether the manufacturer is capable to manufacture products of a consistent quality in a serial production according to the requirements and disposes of the necessary quality system as i.e. incoming goods inspection, material lists and also a final product check. Furthermore, it should be ensured that the required measuring and testing equipment has been calibrated. Within the scope of the surveillance e.g. safety-critical components or other used materials are checked.
In function of the certification mark samples are also taken from the production line for further laboratory tests. Unauthorized changes lead to the invalidity of the certificate and the TÜV SÜD certification mark must not be used anymore.
Testing requirements:
This certification is on a voluntary basis and requires product testing in accordance with IEC/EN60086-1, IEC/EN60086-3, IEC/EN60086-4 as well as monitoring of the production sites. It is being checked by the independent technical experts group TÜV SÜD Product Service. Standards IEC/EN60086-1,IEC/EN60086-3, IEC/EN60086-4 are intended to standardize primary lithium watch batteries with respect to dimensions, nomenclature, terminal configurations, markings, test methods, performance, safety under in-tended use and reasonably foreseeable misuse and environmental aspects.
Cert mark statements:
Type tested: For products not “ready-for-use”, the certification mark statement is only applicable to the certified part of the product (e.g. the switch).
Production monitored: The continuous surveillance of the manufacturing of a product is a basic prerequisite for a certification awarding a certification mark. A certification with a certification mark requires always a product testing as well as monitoring of the production sites. It is being checked by the independent technical experts group TÜV SÜD Product Service whether the manufacturer is capable to manufacture products of a consistent quality in a serial production according to the requirements and disposes of the necessary quality system as i.e. incoming goods inspection, material lists and also a final product check. Furthermore, it should be ensured that the required measuring and testing equipment has been calibrated. Within the scope of the surveillance e.g. safety-critical components or other used materials are checked.
In function of the certification mark samples are also taken from the production line for further laboratory tests. Unauthorized changes lead to the invalidity of the certificate and the TÜV SÜD certification mark must not be used anymore.
Testing requirements:
This certification is on a voluntary basis and requires product testing in accordance with IEC/EN60086-1, IEC/EN60086-3, IEC/EN60086-5 as well as monitoring of the production sites. It is being checked by the independent technical experts group TÜV SÜD Product Service. Standards IEC/EN60086-1, IEC/EN60086-3, IEC/EN60086-5 are intended to standardize primary watch batteries with aqueous electrolyte with respect to dimensions, nomenclature, terminal configurations, markings, test methods, performance, safety under intended use and reasonably foreseeable misuse and environmental aspects.
Cert mark statements:
Type tested: For products not “ready-for-use”, the certification mark statement is only applicable to the certified part of the product (e.g. the switch).
Production monitored: The continuous surveillance of the manufacturing of a product is a basic prerequisite for a certification awarding a certification mark. A certification with a certification mark requires always a product testing as well as monitoring of the production sites. It is being checked by the independent technical experts group TÜV SÜD Product Service whether the manufacturer is capable to manufacture products of a consistent quality in a serial production according to the requirements and disposes of the necessary quality system as i.e. incoming goods inspection, material lists and also a final product check. Furthermore, it should be ensured that the required measuring and testing equipment has been calibrated. Within the scope of the surveillance e.g. safety-critical components or other used materials are checked.
In function of the certification mark samples are also taken from the production line for further laboratory tests. Unauthorized changes lead to the invalidity of the certificate and the TÜV SÜD certification mark must not be used anymore.